Magneto Generator Engine Stator Coil For Suzuki DR200SE 1996-2013 DR125SE 1994-2002 Repl.32101-42A40 / 32101-42A30FEATURES: Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials. Highest grade copper windings, resistant to 200 degrees Celsius. Pick up pulsar coil included. Connector included. All products shipped are tested.SPECIFICATIONS: Condition: Aftermarket 100% Brand New Quanity: 1PC Type: Generator Stator Coil Replacement Part Number: 32101-42A40 / 32101-42A30Dimensions : Interior diameter : 34mm / 1.35" Exterior diameter : 92mm / 3.65" Thickness : 11mm / 0.44"Other specifications : Number of wires: 5 Number of pins: 5 Number of plugs: 2 Number of fixation holes: 3 Fixation holes length: 33mm/1.31"FITMENT: For Suzuki DR200SE 1996-2013 For Suzuki DR125SE 1994-2002PACKAGE INCLUDED: 1x Generator Stator CoilNOTICE: Before installing your new statorCheck the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier. Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation.All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.